Ethernet to 1x RS-422/485 ports with PoE

The EX-6051PoEIS serial data Gateway in a rugged metal case is the easiest way to connect your serial devices over the network (Ethernet). No longer limited to a fixed distance, you can control any RS-232 peripheral device over the network. It is equipped with surge protection and isolation. You can easily integrate the EX-6051PoEIS into your network with an IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping). It can also be controlled using the supplied Virtual Com Port software or other software. The COM ports are then entered in the Device Manager. The EX-6051PoEIS supports PoE (Power over Ethernet) and can be powered directly over the network cable using a suitable switch. In this case, no power supply is required. The EX-6051PoEIS can be screwed directly to the wall or mounted in a 19" rack using the optional DIN-Rail kit (EX-6099).

• Interface: RS-422/485
• 500W Surge Protection and 2.5KV Isolation
• Supports PoE as Powered Device (PD)
• Data Bits: 6, 7, 8
• Stop Bits: 1, 2
• Parity: none, even, odd
• Signals RS-422: TXD+, TXD-, RXD+, RXD-, GND / Signals RS-485: DATA+, DATA-, GND
  - 4-Wire RS-422(TXD+/-, RXD+/-) Full Duplex
  - 2-Wire RS-485 (TXD+/-, RXD+/-) Half Duplex
• Ethernet Protokoll: IP, TCP, UDP, DHCP

Packaging contents:
EX-6051PoEIS, Power Supply +12V/1A, Driver CD, Manual