USB 2.0 to 2S Serial RS-232/422/485, Surge Protection and Isolation (FTDI Chipset)

The EX-1333VIS USB to Serial RS-232/422/485 converter in a metal case provides two high performance RS-232, 422 or 485 serial UART 16C550 interfaces with 15KV ESD surge protection and 2.5KV isolation. It is designed to connect serial devices to the USB 1.1 to 3.2 Gen 2 bus of a PC, server or workstation. The supplied EX-K1542V cable can be attached to the EX-1333VIS using knurled screws without the need for a screwdriver. It is therefore impossible to disconnect the cable yourself. Thanks to the simple installation on the USB port, there is no need to open the computer and the converter can be installed while the computer is running. With the optional DIN-Rail kit (EX-6099), the EX-1333VIS can be mounted on a DIN-Rail in a 19" rack.

• Interfaces: RS-232 V.24, RS-422 and RS-485
• 15KV ESD protection and 2.5KV isolation
• 16C550 FIFO buffer of 16 bytes
• I/O addresses and interrupt assigned by operating system
• Data bits: 7, 8
• Stop bits: 1, 1.5, 2
• Parity: none, even, odd, space, mark
• Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• RS-422 signals: 4-wire (TXD+/-, RXD+/-) full duplex
• RS-485 signals: 2-wire and 4-wire (Data+/-, Data +/-) half duplex/full duplex
• USB bus powered
• LED for operation, TX and RX
• Chipset: FTDI

Packaging contents:
EX-1333VIS, USB cable screw-lock, driver CD, manual