USB 2.0 to 1S serial RS-232 port female with +5V on pin 9 (FTDI Chipset)

The USB 2.0 to RS-232 cable with A-connector provides one high performance 16C550-type UART compatible RS-232 serial port. It supports the external voltage of +5V especially on pin 9 of the female connector. With the easy installation you don t need to open the computer system and install the EX-1311-2F-5V when the system run. The EX-1311-2F-5V can connect directly to the devices because it is equipped with a 9 pin female connector (DCE). We include two hex nut, what can replace with two screws from the EX-1311-2F-5V, if the opposite cable has screws.

• Interface RS-232 V.24 with +5V to pin 9 by the female connector
• 16C550 FIFO Buffer with 16ByteI/O addresses and interrupt is set from the operating system
• Data bits: 7 and 8
• Stop bits: 1, 1.5 and 2
• Parity: none, even, odd, space and mark
• Signal RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• Power from the USB Bus (Bus Power)
• LED Display for RX and TX
• Exchangeable screw with hex nuts
• Chipset: FTDI

Packaging contents: EX-1311-2F-5V, Driver CD, 2x hex nuts, Manual