USB 2.0 to 1S serial RS-232 port with +5V on pin 9 (FTDI Chipset)

The USB 2.0 to RS-232 cable with A-connector provides a serial RS-232 high performance UART 16C550 output. It supports the external voltage of +5V especially on pin 9 of the connector. It is designed to extend another serial output for PC, small workstation or server via the USB 1.1, 2.0 or 3.2 Gen 1 bus. Due to the easy installation there is no need to open the computer and the EX-1311-2-5V can be installed during operation. Two nuts are included, which can easily be replaced with the thumbscrews if the cable to be connected has screws.

• Interface: RS-232 V.24 with +5V on pin 9 by the connector
• FIFO Buffer: 16C550 with 16Byte
• I/O addresses and Interrupt: Set from the operating system
• Data Bits: 7 and 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
• Signal RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• LED Display for RX and TX
• Power from the USB Bus (Bus Power)
• Exchangeable screw with hex nuts
• Chipset: FTDI

Packaging contents:
EX-1311-2-5V, Driver CD, 2x hex nuts, Manual